Zalman Z1 Iceberg White - mATX Mid Tower PC Case/Pre-installed fan 2 x 120mm in - Mini Tower - PC - Weiß - micro ATX - Mini-ITX - Kunststoff - Stahl - Gehärtetes Glas - 16 cm
Bewertungen von Zalman Z1 Iceberg White - mATX Mid Tower PC Case/Pre-installed fan 2 x 120mm in - Mini Tower - PC - Weiß - micro ATX - Mini-ITX - Kunststoff - Stahl - Gehärtetes Glas - 16 cm
Basierend auf 29 Bewertungen
Ein schönes Gehäuse wo man das Innenleben fast schraubenlos montieren kann. Es hat genügend platz für größere und längere Grafikkarten. Das war auch mein ausschlaggebender Grund für den Kauf. Einzig das Blech an der Rückseite scheint mir etwas dünn zu sein. Doch beim Montieren meiner großen GK hatte ich keine Probleme. Die Kabel können hinter dem Blech, wo das Mainboard monitert wird, verlegt werden. Damit sieht das Innenleben sehr übersichtlich aus. Ich würde den wieder kaufen. Für diesen Preis findet man wohl auch kaum was gleichwertiges.
Ein schönes Gehäuse wo man das Innenleben fast schraubenlos montieren kann. Es hat genügend platz für größere und längere Grafikkarten. Das war auch mein ausschlaggebender Grund für den Kauf. Einzig das Blech an der Rückseite scheint mir etwas dünn zu sein. Doch beim Montieren meiner großen GK hatte ich keine Probleme. Die Kabel können hinter dem Blech, wo das Mainboard monitert wird, verlegt werden. Damit sieht das Innenleben sehr übersichtlich aus. Ich würde den wieder kaufen. Für diesen Preis findet man wohl auch kaum was gleichwertiges.
Bachmann
7. Dezember 2017
This has been the second Zalman case to be a disappointment. Even for a budget case I found the build quality suspect from the day I received it. And as I feared one of the USBs first failed which I tried to live with. But now the power button has started to give way, it gets stuck and powers off shortly after being fired up. The only positive thing is that its got me through just over 18 months. Looking for a new case now which most definitely won't be a Zalman.
This has been the second Zalman case to be a disappointment. Even for a budget case I found the build quality suspect from the day I received it. And as I feared one of the USBs first failed which I tried to live with. But now the power button has started to give way, it gets stuck and powers off shortly after being fired up. The only positive thing is that its got me through just over 18 months. Looking for a new case now which most definitely won't be a Zalman.
Jamhead
2. April 2017
Very Good budget PC Case came quickly and suits my needs perfectly.
Very Good budget PC Case came quickly and suits my needs perfectly.
Amazon Customer
28. November 2016
This case was terrible, it turned itself off if you even touched it and sometimes it turned itself off when it want touched it was unreliable and really annoying. This case was also badly designed in the interior as well it was hard to put the motherboard into, doesn't have an SSD tray 2.5" but I knew that before j got it. Please save yourself the suffering and get a better case. Complete waste of money
This case was terrible, it turned itself off if you even touched it and sometimes it turned itself off when it want touched it was unreliable and really annoying. This case was also badly designed in the interior as well it was hard to put the motherboard into, doesn't have an SSD tray 2.5" but I knew that before j got it. Please save yourself the suffering and get a better case. Complete waste of money
Robert
17. Februar 2016
Please be aware this is a low end case, looks nice but only one fan has the connector to fit on to the mainboard, the other fan has to be connected to the PSU, so it will not register in your Cmos. So keeping track of cooling can be problematic. I have therefore swapped one fan replacing it with a one with a small connector, so now both can be connected to the main board and the combined readouts checked.
Please be aware this is a low end case, looks nice but only one fan has the connector to fit on to the mainboard, the other fan has to be connected to the PSU, so it will not register in your Cmos. So keeping track of cooling can be problematic. I have therefore swapped one fan replacing it with a one with a small connector, so now both can be connected to the main board and the combined readouts checked.
Anthonio Palmiere
8. Februar 2016
